The Merritt Inaugural V2 TL stem is CNC machined from 6061 aluminum and features a clean and simple topload design with machined bottom section for weight savings, chamfered edges, solid chromoly stem bolts and a cast Merritt logo on the faceplate for a look that really stands out.
Features:
CNC machined
6061 aluminum
Top load
Cast Merritt logo on faceplate
Clamp Diameter: 22.2mm
Reach: 50mm
Rise: 30mm
Stack Height: 30mm
Width: -
Clamp Bolts: 8 x 1.25mm (x4)
Pinch Bolts: 8 x 1.25mm (x2)
Color: Red, Black, Purple, Polished
Weight: 11.3 oz
The Cult Salvation V4 Stem is the latest updated stem from Cult, based on the OG Salvation style but now wider and stronger.
Solid bolts and a recessed compression bolt area the body is made from 6061 aluminium with internal machining balancing weight and durability.
Made in the USA
Nowear's Missing Link stem V2 version.
CNC T6 6061 Aluminum
Made in Bennet Nebraska just a few miles down the road from The Nowear Compound.
This stem was years in the making. We started with the idea of the top cap looking like chain links of a traditional stamped full link chain, then engraved the abbreviation BMX. From there we proceeded to give the body of the stem a similar feel as well and added to the sides the Nowear logo.
This stem is very strong and ready for all types of abuse
New features on our V2 version are the additional Made in USA engraving & now a recessed fork cap area.
Reach 48mm
Rise 32mm
Weight 12 ounces or 340g with steel hardware. Without hardware 8.8 ounces or 250g
For those looking for titanium bolt upgrades the bolts are a M8 x 1.25
Colors available are: Raw, Gold, Black, Purple & Red
The Fiend Reynolds V4 Stem is Garrett Reynolds' fourth installment of his signature model. This stem features an machined exterior and with no internal machining to virtually eliminate bar slippage. Fiend made sure this stem was stylin' and recessed the compression bolt area of the stem and a laser etched the "FIEND" logo in the face plate to create a great finished look worthy of professional riders.
Features:
CNC machined
6061-T6 Aluminum
Front load
Solid Chromoly stem bolts
Recessed compression bolt area
Reach: 48mm
Clamp Diameter: 22.2mm
Rise: 8.25mm
Stack Height: -
Width: -
Clamp Bolts: 8 x 1.25mm (x4)
Pinch Bolts: 8 x 1.25mm (x2)
Color: Gold
Weight: 11.4 oz
The Animal Pop Off Stem is a modern update of their classic topload stem. Made in the USA and built to take whatever the streets can throw at it..
Note: This stem uses a 1/4" allen wrench. Using a 6mm allen will strip the bolts.
Specifications:
Reach: 48mm
Clamp Diameter: 22.2mm
Rise: 22mm
Stack Height: 33.3mm
Width: -
Clamp Bolts: Solid Oversized (1/4" Allen Hex Heads)
Pinch Bolts: Solid Oversized (1/4" Allen Hex Heads)
Color: Black, Green, Polished
Weight: -
No results match your search. Try removing a few filters.
